Dual-Function (PR&CR) Anchor Cable
New Technology for Controlling Large Deformation of Soft Rock in Tunnels and Underground Works Integrated Cooperative Product of Active Support and Constant-Resistance Yielding Energy Absorption
Category:
Resin-anchored low-pretension bolt
Keywords:
Dual-Function (PR&CR) Anchor Cable
Service Hotline
Product Details
New Technology for Controlling Large Deformation of Soft Rock in Tunnels and Underground Works Integrated Cooperative Product of Active Support and Constant-Resistance Yielding Energy Absorption
After more than ten years of research and engineering application, it has become an effective solution for underground support and slope protection in high-stress soft rock and seismic zones.
Specification Parameters
| Specification | PR&CR/218-1860Φ21.8mm/1860MPa, Yield Strength 513kNUltimate Force 583KN | PR&CR189.1860Φ18.9mm/1860MPa, Yield Strength 360KNUltimate Force 409KN | Remarks |
|---|---|---|---|
| Prestressed Steel Strand | Φ21.8mm/1860MPa, Yield Strength 513kNUltimate Force 583kN | Φ18.9mm/1860MPa, Yield Strength 360kNUltimate Force 409kN | GB/T5224-2023 |
| Prestress Value, kN | 100~220 | 100~180 | Determined by bond strength of surrounding rock |
| Yielding Threshold Pcr | 250~330kN | 180~230kN | 0.5~0.65 of yield force |
| Yielding Length, mm | 200 | 200 | Customizable: 50~600 |
| Borehole Diameter, mm | 45~51 | 42~45 | |
| Resin Cartridge Anchorage Section | ≥1.2m | ≥1.2m | |
| Cement Grout Anchorage Section | ≥1.8m | ≥1.8m |
Principle of Constant-Resistance Yielding & Energy Absorption
-
Curve A: Ideal tension-deformation curve of this technology. By combining mechanical properties and structural design of two types of steel materials, it features a high yield point and large elongation.
-
0-a1: First elastic stage
-
Point a1: Preset yield point
-
a1~a1-2: Corrugated nearly flat elongation section, defined as constant-resistance yield travel length Lcr; the constant force in this plateau segment is named constant-resistance yield force threshold Fcr
-
a1-2~a2: Second elastic stage
-
a2-a3: Strain-hardening and plastic fracture stage
-
Among these characteristics, the nearly flat corrugated mechanical behavior in segment a1~a1-2 comes from the structural effect of components, while other properties originate from intrinsic material mechanical performance.
-
Curve B: Tension-deformation curve of prestressed steel strand or high-strength fine-rolled rebar
-
Curve C: Tension-deformation curve of low-alloy steel (e.g. Q420)
Constant-Resistance Yielding Load Test
-
Load tests on the yielding tube and rod body are carried out on an indoor testing machine to obtain tension-deformation elongation curves as shown in the figure. The constant-resistance yielding force, slip displacement and energy absorbed by the yielding tube are determined.
-
Calculation of Constant-Resistance Absorbed Energy \(W_{cr}≈F_{cr}×L_{cr}=192×0.161=30.91\,\text{kJ}\)
Advantages of Dual-Energy Anchor Cable
· Dynamic Response Mechanism
When the surrounding rock deformation force exceeds the preset threshold, the constant-resistance sliding section of the anchor cable activates. The sliding speed matches the deformation rate of surrounding rock. Under the action of pressure arch, the overall deformation can be controlled to prevent local inward bulging and overbreak.
· Active Prestress
By adopting group anchors at the arch crown, a pressure arch is rapidly formed in surrounding rock at the early excavation stage to improve the overall self-bearing capacity.
· Energy Absorption & Dissipation Capacity
Laboratory tests show that a single anchor cable can absorb energy up to 30~40 kJ, several times higher than that of rigid support.
· Rigid-Flexible Synergy of Integrated Dual-Energy
Initial prestress dominates to restrain deformation; the yielding section slides to release stress in the middle stage; the locking mechanism activates in the later stage to prevent excessive displacement.
·Economy and Safety
By improving the self-bearing capacity of surrounding rock, the thickness of shotcrete and steel arch can be reduced. Controllable reserved deformation cuts excavation overbreak, enhances safety and shortens construction period.
Self-drilling hollow anchor rod system with
The construction technology for self-drilling, pre-stressable hollow anchor rods is suitable for various complex geological conditions
View DetailsSD-type self-drilling (pre-stressed) hollow
Primarily used for permanent system support and advanced pre-support in weak surrounding rock, such as fractured rock strata and loose soil layers.
View DetailsEXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System
The EXC-Type Shell-expanding Removable Hollow Grouting Anchor Rod is a new type of anchor rod developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for engineering scenarios requiring pre-anchoring prior to excavation.
View DetailsDCP Multi-layer Corrosion-Protected
China’s first domestically pioneered multi-corrosion-protection anchor bolt system. This support system features multiple anti-corrosion barriers. It boasts simple structure, convenient construction, excellent durability and low cost, ranking among the anchor bolts with superior supporting performance in China at present.
View Details