Self-drilling hollow anchor rod system with
Self-drilling hollow anchor rod system with
+
  • Self-drilling hollow anchor rod system with
  • Self-drilling hollow anchor rod system with

Self-drilling hollow anchor rod system with

The construction technology for self-drilling, pre-stressable hollow anchor rods is suitable for various complex geological conditions


Category:

Low-pretension expansion-shell rock bolt

Keywords:

Self-drilling hollow anchor rod system with


Service Hotline


Product Details

Construction Technology of Self-drilling Prestressed Hollow Anchor Rod

This construction technology of self-drilling prestressed hollow anchor rod is applicable to various complex geological conditions and construction site environments. It integrates drilling, prestressing, grouting and anchoring functions. Featuring simple construction procedure, high efficiency and favorable anchoring performance, it avoids borehole collapse risks.

The self-drilling prestressed hollow anchor rod adopts the anchor rod body itself as the drill rod for direct drilling, solving the difficulty of anchor installation under complex geological conditions where boreholes cannot retain stability. Meanwhile, it enables timely installation and active prestressing for underground engineering support, meeting anchoring requirements in loose and unstable rock strata.

 

Structural Principle

The self-drilling prestressed hollow anchor rod combines the anchor rod body and drill rod into one integrated unit capable of prestress application. It generally consists of drill bit, shell-expanding anchor assembly (cone sleeve, expansion tube, limit sleeve), hollow rod body, plate washer and nut. The rod body is fully threaded with international standard external threads. The drill bit is mounted at the top of the rod body and the nut at the tail end. During installation, the hollow anchor rod drives the drill bit to drill. Once drilling reaches the designed depth, install plate washer and nut, apply prestress and carry out grouting to complete anchor installation.

 

Scope of Application

The construction technology of self-drilling prestressed hollow anchor rod adapts to various complex geological conditions and site environments. It is widely used in slope stabilization, dangerous rock mass reinforcement, deep foundation pit support, tunnel support and other projects.

 

Specifications and Technical Parameters

Anchor Rod Type Nominal Diameter (mm) Lower Yield Force (kN) Ultimate Force (kN) Total Elongation at Ultimate Force
Self-drilling Hollow Anchor Rod 25 ≥150 ≥200 ≥5%
  32 ≥280 ≥360  
  38 ≥400 ≥500  
  51 ≥630 ≥800  

 

Product Structure and Features

1. Drill Bit: Made of high-strength alloy steel. It drives the rod body to rotate and advance by cutting surrounding rock.

2. Hollow Anchor Rod Body: Features grouting function to bear loads and transfer stress.

3. Sliding Sleeve: When surrounding rock deforms to a certain extent, resistance is generated via sliding limiting to enable pressure yielding and energy dissipation of the anchor rod.

4. Plate Washer & Nut: Fasteners for force transmission.

The self-drilling multi-point sliding energy-dissipating yielding anchor adopts construction procedures basically identical to ordinary self-drilling grouting anchor rods. Its key component is the sliding sleeve installed at the mid-section of hollow drill rod segments. For example, a 2 m rod segment is fitted with a 1 m-long sleeve crimped onto the drill rod at both ends. A clearance between sleeve and drill rod allows free sliding; the cavity is filled with anti-corrosion grease, and both ends of the sleeve are sealed against the drill rod. For a 10 m anchor rod composed of 5 segments, 5 sliding sleeves can be arranged with a total sleeve length up to 5 m. Comparative tests against conventional self-drilling hollow anchors were carried out in the Muzhailing Tunnel. This product can conveniently replace the 32-type yielding anchor which construction crews are less familiar with, delivering remarkable performance. Under geological conditions of high geostress, fractured surrounding rock and high borehole collapse risk, this technology can achieve favorable results.

 

Product Advantages

The yielding mechanism of this anchor rod is described below. After anchor installation, the grout consolidates with the anchor rod and restrains deformation, while only the rod section within the sliding sleeve (drill rod) is allowed to elongate freely. Within surrounding rock, as rock mass undergoes compressive deformation, multi-point deformation occurs along the anchor rod, leading to overall elongation of the anchor and realizing pressure yielding function.

Self-drilling hollow anchor rod system with

The construction technology for self-drilling, pre-stressable hollow anchor rods is suitable for various complex geological conditions

View Details

SD-type self-drilling (pre-stressed) hollow

Primarily used for permanent system support and advanced pre-support in weak surrounding rock, such as fractured rock strata and loose soil layers.

View Details

EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System

The EXC-Type Shell-expanding Removable Hollow Grouting Anchor Rod is a new type of anchor rod developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for engineering scenarios requiring pre-anchoring prior to excavation.

View Details

DCP Multi-layer Corrosion-Protected

China’s first domestically pioneered multi-corrosion-protection anchor bolt system. This support system features multiple anti-corrosion barriers. It boasts simple structure, convenient construction, excellent durability and low cost, ranking among the anchor bolts with superior supporting performance in China at present.

View Details

Consult Now

Please provide your contact information, and we will contact you as soon as possible.

Submit Message
Consult Now