EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System
EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System
+
  • EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System
  • EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System

EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System

The EXC-Type Shell-expanding Removable Hollow Grouting Anchor Rod is a new type of anchor rod developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for engineering scenarios requiring pre-anchoring prior to excavation.


Category:

Low-pretension expansion-shell rock bolt

Keywords:

EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System


Service Hotline


Product Details

The EXC-Type Shell-expanding Removable Hollow Grouting Anchor Rod is a new type of anchor rod developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for engineering scenarios requiring pre-anchoring prior to excavation. Initial low prestress can be applied as needed to implement pre-anchoring support for rock mass to be excavated. The anchor rods on the rock mass section under investigation can then be removed before excavation commences. It serves as an effective solution for geotechnical projects where rock and soil mass undergoes rapid stress release after excavation, requiring staged excavation as well as one-time integral support.

 

Product Structure and Features

1. Shell-expanding anchor head — Steel shell-expanding anchor head developed by Tuqiang Company, capable of forming supporting force rapidly.

2. Outer sleeve and grouting pipe — Isolate the removable anchor rod segment from anchoring cement slurry for easy disassembly.

3. Load-bearing nut — Installed at the bottom of the pressure relief device to serve as a stopper.

4. Hollow anchor rod body — Consists of removable segment and anchoring segment connected by coupling sleeves. Multi-section anchor rods with coupling sleeves can be adopted according to site conditions.

5. Anchor plate and nut are general-purpose components; their specifications comply with industry standards for railway, water conservancy and other sectors.

 

Scope of Application

1. Mainly used for staged excavation, pre-support and other temporary support of medium-hard and above surrounding rock with high ground stress.

2. Geotechnical anchoring support for underground works, traffic & hydraulic tunnels, mining engineering, slopes and foundation pits.

3. Prevention and support for geotechnical projects featuring large deformation, high ground stress and rapid stress release after excavation.

 

Construction Notes

Drilling: Boreholes shall be round and straight. Cross bits or button bits shall be adopted for drilling. The borehole diameter of anchor rods shall comply with the provisions specified in the technical parameter table. Strictly control the borehole diameter to guarantee installation performance of the shell-expanding anchor head.

Grouting: Pure cement slurry shall be used with a water-cement ratio w/c=0.38~0.40 and no sand contained. Grouting shall be performed with a special screw grout pump for anchor rods.

Rod Body: The outer sleeve shall be well protected before construction to prevent damage or detachment. If such defects occur, the rod body shall not be used.

Pretensioning: Level the hole opening with cement mortar. Pretensioning shall be carried out by a special wrench for anchor rods. Refer to EX-type Shell-expanding Hollow Grouting Anchor Rod manufactured by Tuqiang Company.

 

Self-drilling hollow anchor rod system with

The construction technology for self-drilling, pre-stressable hollow anchor rods is suitable for various complex geological conditions

View Details

SD-type self-drilling (pre-stressed) hollow

Primarily used for permanent system support and advanced pre-support in weak surrounding rock, such as fractured rock strata and loose soil layers.

View Details

EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System

The EXC-Type Shell-expanding Removable Hollow Grouting Anchor Rod is a new type of anchor rod developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for engineering scenarios requiring pre-anchoring prior to excavation.

View Details

DCP Multi-layer Corrosion-Protected

China’s first domestically pioneered multi-corrosion-protection anchor bolt system. This support system features multiple anti-corrosion barriers. It boasts simple structure, convenient construction, excellent durability and low cost, ranking among the anchor bolts with superior supporting performance in China at present.

View Details

Consult Now

Please provide your contact information, and we will contact you as soon as possible.

Submit Message
Consult Now