Resin-anchored low-pretension bolt
Resin Cartridge Bonded Prestressable Hollow Grouting Anchor System is a new type of prestressed hollow anchor developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for weak surrounding rock. This product has obtained the National Invention Patent. It serves as an effective solution for tunnel support in weak rock and soil surrounding rock (where mechanical expansion shell anchoring delivers poor performance).
Category:
Resin-anchored low-pretension bolt
Keywords:
Resin-anchored low-pretension bolt
Service Hotline
Product Details
Product Structure and Features
The anchor consists of anchorage section bar (optional perforated steel pipe with built-in early-strength resin anchoring agent), hollow bar body, coupling sleeve, bearing plate and nut.
1. Anchorage Section Bar: Matched by three-diameter principle, the outer diameter of the bar adopts Φ32–35.
2. Perforated Steel Pipe: Connected to the anchorage section bar by snap fasteners. It can accommodate 3540 early-strength resin anchoring agent. After the anchor is properly installed, the anchorage section bar extrudes the resin and mixes it for anchoring.
3. Load-bearing Nut: Fitted with hemispherical washer to adapt to irregular tunnel rock surfaces and adjust the anchor force.
4. Hollow Anchor Bar: Connected to the anchorage section via special groutable coupling sleeves. Multiple bar sections can be assembled with coupling sleeves according to site conditions. Bearing plates and nuts are general-purpose components, and their specifications comply with industry standards for railway, water conservancy and other sectors.
Specifications and Technical Parameters
| Product Model | Nominal Diameter (mm) | Lower Yield Force (kN) | Ultimate Force (kN) | Total Elongation at Ultimate Force (%) |
| G-YZKM-25 | 25 | 150 | 200 | 5 |
| G-YZKM-32 | 32 | 280 | 360 | 5 |
| G-YZKM-38 | 38 | 400 | 500 | 5 |
Construction Schematic Diagram

The anchorage section bar mixes the early-strength resin cartridge to achieve rapid anchoring. The Φ25 hollow anchor bar serves as the free length, with bearing plates, nuts and washers as locking components to deliver rapid support force. Through the hollow anchor bar and special connecting sleeves with grouting holes, post-grouting can be performed to ensure full grout filling and realize full-length bonding and durability of the anchor.

Construction Notes
Drilling: To ensure straight boreholes and reliable anchoring installation quality, cross cut bits or button bits shall be used; chisel bits are not recommended.
Grouting: Special screw pump grouting machine shall be adopted.
Early-strength Anchoring Agent: Early cement cartridges and resin cartridges.
Post-grout Material: Pure cement grout. The recommended water-cement ratio (W/C) ranges from 0.30:1 to 0.45:1.
Prestressing Method: Same as EX shell-expanding prestressed hollow grouting anchor manufactured by Tuqiang Company.
Self-drilling hollow anchor rod system with
The construction technology for self-drilling, pre-stressable hollow anchor rods is suitable for various complex geological conditions
View DetailsSD-type self-drilling (pre-stressed) hollow
Primarily used for permanent system support and advanced pre-support in weak surrounding rock, such as fractured rock strata and loose soil layers.
View DetailsEXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System
The EXC-Type Shell-expanding Removable Hollow Grouting Anchor Rod is a new type of anchor rod developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for engineering scenarios requiring pre-anchoring prior to excavation.
View DetailsDCP Multi-layer Corrosion-Protected
China’s first domestically pioneered multi-corrosion-protection anchor bolt system. This support system features multiple anti-corrosion barriers. It boasts simple structure, convenient construction, excellent durability and low cost, ranking among the anchor bolts with superior supporting performance in China at present.
View Details