GY Type One-time Grouting Post-tensioned Prestressed Slope Anchor System
GY Type One-time Grouting Post-tensioned Prestressed Slope Anchor System
+
  • GY Type One-time Grouting Post-tensioned Prestressed Slope Anchor System
  • GY Type One-time Grouting Post-tensioned Prestressed Slope Anchor System

GY Type One-time Grouting Post-tensioned Prestressed Slope Anchor System

Independently developed domestically pioneering one-time grouting post-tensioned prestressed thick steel bar slope anchor, patented.


Category:

Low-pretension expansion-shell rock bolt

Keywords:

GY Type One-time Grouting Post-tensioned Prestressed Slope Anchor System


Service Hotline


Product Details

Product Structure

  1. Hollow Bar – Special fully-threaded hollow anchor bar developed by Tuqiang Company

  2. Solid Bar – Special fully-threaded solid anchor bar developed by Tuqiang Company; standard fine-rolled rebar is also acceptable

  3. Coupler – Used for joining anchor bars, only for connection in the anchorage zone

  4. Centralizer – Centers the anchor bar in stratum to guarantee grout cover and form free length; olive-shaped adjustable centralizer is available to adapt to different borehole diameters

  5. Free-length Sleeve – UPVC or HDPE pipe, applied to isolate anchor bar and prestress

  6. End Fitting – Made of HDPE or UPVC for fixing

  7. Anchor Hole Sleeve – Steel flared sleeve for borehole protection, isolation and anti-corrosion

  8. Bearing Plate – Load bearing

  9. Nut – Fastening

  10. Grouting Tip – For grouting of GY/H anchor and front-end protection of SR type

  11. Grease Injection Port – Anti-corrosive agent (e.g. lithium base grease) can be injected into the cavity between anchor bar and sleeve for better isolation of free-length anchor bar from outside, improving anti-corrosion performance and working property

  12. Grout Pipe – For grouting of GY/SR anchor

  13. Vent Pipe – Used for air venting as required by design and construction

 

Product Features

New type anchor developed specifically for permanent slope support works

A Ultimate tensile capacity of anchor: 250~650kN, multiple specifications available

B Thick rebar features large cross-section and small surface area. Better corrosion resistance and less high-stress corrosion than prestressed anchor cables

C More convenient grouting and prestressing construction compared with prestressed anchor cables

D High cost performance

 

Specifications & Technical Parameters

Product Model

Anchor Bar Model

Ultimate Tensile Force (kN)

Recommended Prestress (kN)

Free-length Sleeve OD × Wall Thickness (mm)

Centralizer OD (mm)

Anchor Hole Sleeve OD × Length × Wall Thickness (mm)

Bearing Plate L × W × T (mm)

Grouting Tip Outlet Hole Dia. (mm)

Hex Nut S×H (mm)

Borehole Diameter (mm)

Remarks

GY/HS32

S32/6-A

250

120

φ40×1.6

~90

φ115/95×300×0.5

150×150×12

3-φ12

48×44

~100

Commonly used

GY/H32

S32/6-C

310

155

φ40×1.6

~90

φ115/95×350×0.5

150×150×12

3-φ12

48×44

~100

Commonly used

GY/H38

S38/8-A

450

225

φ50×2.4

~100

φ110/105×200×0.5

150×150×16

3-φ12

57×44

~110

Commonly used

GY/H51

S51/8-A

650

325

φ63×3

~120

φ140/115×400×0.5

200×200×16

3-φ15

85×52

~125

 

Notes Anchor bar length: Standard manufacturing length of single bar is 6 m and 9 m, which shall be specified when ordering. Special specifications can be produced upon request. Anchor bars and accessories can be hot-dip galvanized to enhance corrosion resistance. Other accessories: Bar nuts, coupling sleeves (vent pipes), etc.

 

Scope of Application

Slope support for highway, railway, mining and hydraulic engineering, as well as foundation pit support for building works.

 

Construction Technology & Installation Steps

Drilling & Hole Cleaning → On-site Assembly of Anchor Bar → Anchor Installation → Grouting → Anchor Hole Concrete Capping → Prestressing Tensioning & Load Locking → Sealing

 

Construction Precautions

According to different stratum conditions, the fixed anchor length, permanent effective prestress value and tensioning procedure of prestressed anchor bars shall be determined after field tests.

The constructor shall pay full attention to the grouting quality of protective grease for the free length. The free length is critical to ensure long-term performance of prestress.

After grouting, wipe the anchor bar clean to protect anchor threads for convenient prestress application.

When injecting grease into the free length, handle and place the anchor carefully to prevent grease leakage and avoid violent vibration.

Personnel, equipment, construction control, records and safety requirements for stressing works shall comply with conventional construction specifications for prestressing works.

Self-drilling hollow anchor rod system with

The construction technology for self-drilling, pre-stressable hollow anchor rods is suitable for various complex geological conditions

View Details

SD-type self-drilling (pre-stressed) hollow

Primarily used for permanent system support and advanced pre-support in weak surrounding rock, such as fractured rock strata and loose soil layers.

View Details

EXC-Type Pre-anchored Removable Prestressed Hollow Grouting Anchor Rod System

The EXC-Type Shell-expanding Removable Hollow Grouting Anchor Rod is a new type of anchor rod developed by Hangzhou Tuqiang Engineering Materials Co., Ltd. for engineering scenarios requiring pre-anchoring prior to excavation.

View Details

DCP Multi-layer Corrosion-Protected

China’s first domestically pioneered multi-corrosion-protection anchor bolt system. This support system features multiple anti-corrosion barriers. It boasts simple structure, convenient construction, excellent durability and low cost, ranking among the anchor bolts with superior supporting performance in China at present.

View Details

Consult Now

Please provide your contact information, and we will contact you as soon as possible.

Submit Message
Consult Now